INFORMATION HUB
Choosing a Passive Fire Protection Contractor
Passive fire protection is only as good as its installation. The right product, fitted badly, may not perform in a fire, and because much of the work is hidden once complete, it can be hard to check afterwards. Choosing a competent contractor is one of the most important decisions you will make on a fire-stopping, compartmentation or fire door project. This guide sets out what to look for and what questions to ask.
Why contractor choice matters
Fire-stopping products and fire doors are tested as systems under specific conditions. Achieving that performance on site depends on the installer understanding the test evidence, choosing the right system for each situation and fitting it correctly. Mistakes are easy to make and hard to spot later. In England, the Fire Safety Order requires responsible persons to use competent people to help them, and the Building Safety Act 2022 has put a stronger focus on competence across the industry.
What to look for
Relevant experience
Ask about the contractor’s experience with buildings and work similar to yours, whether that is fire stopping in a busy commercial building, compartmentation surveys in residential blocks or fire door installation and maintenance. Ask for references from comparable projects.
Third-party certification
Third-party certification schemes, such as FIRAS or BM TRADA, assess installers’ competence, quality procedures and samples of their work. Certification is not a guarantee, but it provides independent assurance. Check that the certification is current and covers the type of work you need, as scopes vary. Certification bodies usually publish lists of certified companies you can check.
Knowledge of products and test evidence
A good contractor should be able to explain which systems they propose, why they are suitable and what test evidence supports them, including classifications under standards such as BS EN 13501-2 or BS 476. Be wary of anyone who suggests one product will suit every situation.
Training and supervision
Ask how operatives are trained, whether they hold relevant qualifications or manufacturer training and how work is supervised and checked.
Records and documentation
Ask what you will receive at the end of the job. Good practice often includes labelled seals, photographs of each penetration before closing up, a schedule of work showing locations and products, and certificates where work is covered by a certification scheme. These records support your fire risk assessment and future maintenance.
Insurance
Confirm the contractor holds appropriate insurance for the work.
Questions to ask before you appoint
- What experience do you have with buildings like ours?
- Are you third-party certified, and does the certification cover this work?
- Which products and systems do you propose, and what is the test evidence?
- How will you deal with situations not covered by standard details?
- Who will carry out the work, and how are they trained and supervised?
- What records, labels and photographs will we receive?
- How will you co-ordinate with other trades and our building management procedures?
- How will you report concealed defects you find during the work?
Warning signs
- Unable or unwilling to provide test evidence or product data.
- Vague answers about certification or competence.
- Quotes that are much lower than others without a clear explanation.
- No offer of photographs, labelling or completion records.
- Use of general-purpose foam or sealants as fire stopping.
Getting the scope right
Clear scoping helps contractors price fairly and reduces surprises. Share what you know about the building: drawings, the fire strategy, the fire risk assessment and previous survey reports. Be clear whether you need a survey, installation, remedial work or ongoing inspection. In occupied buildings, agree access, working hours and safety arrangements in advance.
Frequently asked questions
Is third-party certification a legal requirement?
Third-party certification is not generally a legal requirement in itself, but it is widely recognised as a way of demonstrating competence and is often requested by clients, insurers and designers.
Should the same contractor survey and repair?
Either approach can work. Some clients prefer an independent survey followed by separate remedial works; others value a single contractor managing both. Clarity on scope and records matters most.
What records should I keep after the work?
Keep schedules, photographs, product details, certificates and any reports, and update your building records and fire risk assessment as appropriate.
This guide is general information only. Every project is different, so get building-specific advice from a competent professional.
Related guides
Planning passive fire protection work? Lancashire Fire Security takes a practical, professional approach and can discuss your project, building or compliance question. Email [email protected] or call 0800 038 9841.
Need advice on a passive fire protection project?
Tell us about your building, project or compliance question.
PASSIVE FIRE PROTECTION
Services | Knowledge Hub | About | Contact
Company Number: 11888399 | VAT Registration number: 373832577