INFORMATION HUB
What Is Passive Fire Protection?
Passive fire protection is one of the most important, and most overlooked, parts of a building’s fire safety. It works quietly in the background, built into walls, floors, ceilings and doors, and it is designed to help contain fire and smoke so that people can escape and the building can resist the spread of fire for a period of time. This guide explains what passive fire protection is, how it works, the main types and why it needs to be correctly installed and maintained.
A simple definition of passive fire protection
Passive fire protection refers to the built-in features of a building that help contain fire and smoke and maintain the performance of fire-resisting elements. Unlike active systems, which detect or respond to a fire, passive measures do not need to be switched on or triggered. They form part of the building’s structure and layout and are there all the time.
The basic idea is to divide a building into areas that can hold back fire and smoke, protect escape routes and help the structure keep its stability for long enough to support evacuation and firefighting. How much protection is needed, and where, depends on the individual building and its fire strategy.
How passive fire protection works
Fire-resisting construction is usually described in terms of how long it can maintain certain performance criteria when tested. The main criteria are:
- Integrity – the ability to stop flames and hot gases passing through.
- Insulation – the ability to limit the temperature rise on the side away from the fire.
- Load-bearing capacity – for structural elements, the ability to continue supporting a load.
In the UK, products and systems are tested and classified under British Standards such as BS 476 or the European BS EN 13501 classification system. A wall might be described as providing 60 minutes of fire resistance, for example, but that rating only applies when the whole system is built as tested, including any openings, joints and penetrations.
The main types of passive fire protection
Fire-resisting walls and floors
Fire-resisting walls and floors form compartment lines that divide a building into separate fire compartments. They help restrict a fire to the area where it starts.
Fire stopping
Pipes, cables, ducts and other services often pass through fire-resisting walls and floors. Fire stopping seals these openings, and the gaps and joints in fire-resisting construction, so that the separating element can keep its fire performance.
Cavity barriers
Concealed spaces such as ceiling voids, raised floors and wall cavities can allow fire and smoke to travel unseen. Cavity barriers are installed to close and subdivide these cavities.
Fire doors
Fire doors allow people to move through compartment walls and protected routes in normal use while helping to hold back fire and smoke when closed. The whole door assembly, including the frame, seals, hardware and self-closing device, needs to be suitable.
Structural fire protection
Some structural elements, such as steelwork, may be protected with boards, sprayed coatings or intumescent paints to help them maintain their load-bearing capacity for a required period.
Why passive fire protection matters
A building’s fire safety measures need to work together. Even where fire-resisting walls and floors have been installed, unsealed service openings, damaged barriers or poorly fitting doors can compromise the intended level of protection. Many of these weak points are hidden above ceilings, inside risers or behind panels, so they can go unnoticed for years.
Alterations are a common cause of problems. New cabling, replacement pipework, IT upgrades and refurbishment works can all breach compartment lines if openings are not correctly reinstated afterwards.
Who is responsible for passive fire protection?
In England, responsibilities are shared between those who design and build, and those who manage and occupy buildings. The Building Regulations 2010, supported by Approved Document B, set requirements for new work and material alterations. For most non-domestic premises and the common parts of multi-occupied residential buildings, the Regulatory Reform (Fire Safety) Order 2005 places duties on the “responsible person”, including carrying out a fire risk assessment and maintaining fire safety measures. Our guide to passive fire protection regulations in England explains this in more detail.
Frequently asked questions
Is passive fire protection a legal requirement?
Fire-resisting construction and related measures are required in many situations under building regulations, and fire safety measures in many existing premises must be maintained under fire safety legislation. What applies to a particular building depends on its use, design and fire strategy.
What is the difference between passive and active fire protection?
Passive fire protection is built into the structure, such as fire-resisting walls, fire stopping and fire doors. Active fire protection includes systems such as fire alarms and sprinklers that detect, warn or respond to a fire.
Does passive fire protection need maintaining?
Yes. Damage, wear and building alterations can all reduce its effectiveness. Regular inspection and prompt repair are an important part of managing fire safety.
How do I know whether my building’s passive fire protection is adequate?
A suitable assessment by a competent fire safety professional can help identify visible defects and areas needing further investigation. Some problems are concealed and may require access to voids or building records.
This guide is general information only. Every building is different, so you should get building-specific advice from a competent professional before making decisions about fire safety.
Related guides
Need advice on passive fire protection in your building? Lancashire Fire Security can discuss your requirements and help you identify the appropriate next step. Email [email protected] or call 0800 038 9841 to speak to our team.
Need advice on a passive fire protection project?
Tell us about your building, project or compliance question.
PASSIVE FIRE PROTECTION
Services | Knowledge Hub | About | Contact
Company Number: 11888399 | VAT Registration number: 373832577